Skip to main content

Engineering Drawing Basic Tips & Rules, Lettering Dimensions etc













Comments

  1. Emaraatpk29 September 2019 at 23:35

    Thank you so much for posting this important information. This is great.
    Arbitration in Islamabad

    ReplyDelete
  2. edgardobermeyer5 March 2022 at 03:57

    tasino meaning - Classic Iron - Titanium Arts
    tasino titanium white octane blueprint meaning. titanium sheet TASINO Meaning; titanium white wheels TASINO definition in the nano titanium babyliss pro context of TASINO meaning. TASINO head titanium ti s6 meaning. TASINO definition in the context of TASINO

    ReplyDelete

Post a Comment

Popular posts from this blog

Report of Khari-ii Hydro-Power Project, Pakistan

First phase of the Project (1MW) was setup in 2003 on 50 cusecs   water allocated  to AJK for Irrigation of Khari and Panjeri areas downstream Mangla Dam.   The 2 nd Phase of the Project (3.5 MW) is being constructed on the additional  allocation of 126 cusecs water allocated to AJK by government of Pakistan for drinking and industrial demand of Mirpur City under Mangla Dam Raising agreement signed and executed in June 2003.    Visit the Link for more detail. thanks https://drive.google.com/file/d/1xIZw08-q0HV1NBLOS_1zC048J1WRMpui/view?usp=sharing
Post a Comment
Read more

Balancing Canal dept

Balancing Canal depth Balancing Canal depth: "Balancing  canal  depth  comes when the canal is in partially embankment and partially in cutting.It is the  depth  of the canal(H) which gives equal amount of filling(i.e earth required for formation of Banks) and cutting(i.e earth from digging). " Balancing canal depth comes when the canal is in partially embankment and partially in cutting.It is the depth of the canal(H) which gives equal amount of filling(i.e earth required for formation of Banks) and cutting(i.e earth from digging). For a given cross-section of a canal, it has only one balancing depth. For this depth the canal sectional will be economical. B= Bed width. b1,b2= width of embankment of left and right side respectively. d= excavation depth. h= embankment height. H=height of embankment from the bed of the canal.     X- sectional area in cutting =Bd+sd 2       X- sectional area in...
Post a Comment
Read more